Why does electronic cigarette leak oil?

Why does electronic cigarette leak oil? Correct use of electronic cigarette

Today, the development of e-cigarettes can be said to be in full bloom. Earth shaking changes have taken place in various functions and appearance design structures. There are great differences in the use methods of different styles and types of e-cigarettes. E-cigarettes are usually developed for foreign markets, and many operation instructions are in English, which has brought great changes to many consumers, Then bolega technology will generally explain why the e-cigarette leaks and the use methods, skills and precautions of the e-cigarette for different models and types. According to the development and reform of electronic cigarette, it can be divided into simulation disposable electronic cigarette, mini rechargeable electronic cigarette, ego electronic cigarette, mechanical rod electronic cigarette, box electronic cigarette, voltage regulation and temperature control electronic cigarette, high-power electronic cigarette and so on.

Application method of conventional ego series electronic cigarette

1. To open the cigarette holder, rotate the thread first, pull it up or insert it vertically, do not tilt it

2. Do not add smoke oil from the small hole in the middle of the atomizer. The middle vent is not the refueling position

3. Electronic cigarette is a high-temperature heating principle. Condensate will be generated at the top of the cigarette rod. It must be wiped with a paper towel before charging.

4. In addition to the use frequency, the service life of the atomizer has a very important relationship with the use habit. The service life can be prolonged by keeping the service interval of more than 5 seconds each time

5. The built-in lithium battery of the cigarette rod has no memory activation and can be fully charged

6. The cigarette rod is controlled by pressing and smoking. When using, press and hold the cigarette rod button, and release the button if you don't smoke

Instructions for the use of adjustable pole electronic cigarette why the electronic cigarette leaks oil and the correct use method of electronic cigarette (Fig. 2)

Electronic cigarette, also known as steam electronic cigarette and electronic atomizer, has the same appearance and similar taste as cigarettes. It can also smoke, taste and feel like cigarettes. Electronic smoke controls the output and working state of smoke through high-tech silicon chips and airflow sensors. Nicotine is atomized, atomizing the solution containing nicotine and essence into particles, absorbing through the lungs, and spitting out simulated smoke. However, how to use e-cigarettes correctly is a problem that many consumers have been confused. The methods of using e-cigarettes correctly will be introduced in detail below.

1. E-cigarettes must be charged for the first time, usually more than 4 hours. E-cigarettes also use lithium batteries similar to mobile phones, so they should be deeply flushed and placed for the first time.

2. When fully charged, replace it with a new cigarette bomb, that is, a cigarette holder. After installation, please note that the smoke cartridge should not be used immediately after installation. It should be used for more than 1 minute. The purpose is to make the liquid of smoke bomb better integrate with the atomizer of electronic smoke and volatilize more smoke.

3. Many friends use e-cigarettes and will keep smoking until the smoke bomb runs out or the battery is fed. In fact, it is not good to smoke continuously for a long time, which not only affects the service life of the electronic cigarette, but also the liquid of the cigarette bomb can not volatilize best. The correct way to use e-cigarettes is to pause slightly when smoking for a while, which can not only protect e-cigarettes, but also delay the feeling of smoking.

4. The atomizer of electronic cigarette should be cleaned frequently, because the non-volatile liquid will condense and adhere to it after a long time of use, and excessive accumulation will affect the heating of the atomizer and make the smoke bomb unable to be used normally. We can wipe it slowly with a wet cloth dipped in a little alcohol or water. It is generally recommended to clean it once a week.

Precautions for oil leakage of electronic cigarette

The normal charging of electronic cigarette should choose 220 DC, which can be filled every time (except the first time). When not in use, it can be placed in a special cigarette box. Regularly check all parts of the electronic cigarette accessories, and replace them in time in case of damage, so that they can be used for a long time. Generally, the service life of e-cigarettes with good quality is about 3-5 years.

How should a novice operate the e-cigarette host?

With the emergence of the voltage regulating host, the electronic cigarette key evolved from a single key to a three key structure. The host continues to develop, but most hosts still use the first generation electronic cigarette to start up by pressing the ignition button five times. With the continuous development and updating of the host function, the key combination of the three key host is not limited to ignition and adjusting the output value. The key combination can be used to complete function adjustment and mode switching. With the increasing functions of the host, the preset keys of the host are few and the combination key routines are many. It is not easy for novices to operate and select the function mode. Therefore, in this article, the author shares some common host operation methods for your reference.

1、 Common operation modes of common host

Why does the electronic cigarette leak oil? How to use the electronic cigarette correctly (Fig. 4)

1. Confirm the atomizer. Generally, the host will automatically detect the resistance value after the atomizer is installed. When replacing a different atomizer and installing the host, it will prompt whether to install a new atomizer. Under the default setting, press the A. [+] key to confirm the new atomizer; b. [-] key to confirm the original atomizer.

2. Lock / unlock button. In order to prevent consumers from touching the key by mistake during carrying, some hosts are preset with the function of locking the key. Common operation of lock / unlock key: it is common for the host with lock key function to click the ignition key 5 or 3 times continuously to lock all key positions under the startup state; The host without preset lock function can only be shut down by pressing the ignition button five times.

3. Adjust the output mode. At this stage, the output box equipment is equipped with temperature control function. Under the temperature control function, there are different types of heating wire output modes such as Ni, Ti and SS. Therefore, it is necessary to switch the types of heating wire modes. Some hosts have the function of setting menu, which is different from the operation mode of hosts without menu function. a. Common operation of adjustment mode with menu function: for the host with menu function, usually press the ignition key for three times to enter the menu mode, [+] [-] to select the corresponding temp (temperature control mode), confirm the ignition key, add or subtract to select and switch the heating wire type output mode. b. Common operation of adjustment mode without menu function: the host without menu function usually adopts the mode selection function by continuously pressing the ignition key three times, and different heating wire types and modes are selected in turn by adding and subtracting the key positions.

4. Unlock / lock power. Locking the power is to prevent players from touching the plus and minus buttons by mistake in daily use, so as to make the power deviate from the preset value. If the deviated power is greater than the preset power, it will cause poor experience and damage to the atomization core when igniting again, so it is necessary to lock the set power. Common unlocking / locking power operation: when the machine is started without locking key, press the [+] [-] key at the same time to pop up a prompt (similar to to to unlock hold + / - or up & down locked) to indicate that it is locked. Press the [+] [-] key again to unlock power.

5. Lock resistance. Not all hosts have the function of locking resistance. Locking resistance is to prevent the resistance from adjusting with the change of calorific value. This function is usually used in the temperature control mode. Because the resistance of the heating wire used in the power mode changes little after burning, but the material of the heating wire used in the temperature control mode is easy to adjust the resistance with the change of heat. The temperature control mode is based on the change of coil resistance, so the accuracy of resistance is very important. If the initial resistance detected by the chip is not accurate, the temperature calculated according to TCR will not be accurate. If the base number is wrong, the whole formula is wrong. Common lock / unlock resistance combination keys in temperature control mode: A. press the [+] [-] key at the same time; b. Press [ignition] and [+] simultaneously.

Why does the electronic cigarette leak oil? How to use the electronic cigarette correctly (Fig. 5) II. Common operations of DNA chip host

Recently, the DNA chip host with high attention has comprehensive functions and outstanding performance. However, with various functions, the daily operation mode is cumbersome, so it is also a matter for novices. Therefore, the author also briefly explains the daily operation of DNA host here.

1. On / off. The host configured with DNA chip starts up by pressing the ignition button five times. It cannot shut down when it is turned on, but it will enter sleep for automatic shutdown when it is not used for a long time. Therefore, only use the ignition button for 5 consecutive times to lock / unlock the key to avoid touching the ignition button by mistake.

2. Confirm to connect the atomizer. Like other hosts, DNA host will automatically measure resistance and prompt to replace the atomizer when it is connected to the atomizer. For the same operation, press [+] to confirm and [-] to cancel.

3. Switch mode. When the host locks all the keys, press the [+] [-] key for a few seconds to enter the temperature control mode (Ni wire temperature control by default). The temperature value can be adjusted through the [+] [-] key position, and the temperature unit can be switched when the value is adjusted to the end. The temperature unit displays f or C. When the maximum temperature value of F is 600F, the word "off" will appear after adjustment. Press the ignition key once to confirm to exit the temperature control mode.

4. Lock the resistance / switch screen display. When the whole machine is locked, press and hold the ignition key and [+] at the same time to set the resistance value of "lock / unlock"; Press the ignition key and [-] simultaneously to display the "on / off" screen.

5. Lock / unlock power or temperature. When the host is not locked, press the [+] [-] key at the same time to lock the power or temperature. Similarly, press and hold [+] [-] at the same time to exit the locking power or temperature function.

6. Memory mode switching. The DNA host can support the PC preset mode, which can preset a total of 8 user-defined settings. In the host key unlocked standby mode, press the [+] [-] key at the same time to lock the power or adjust the temperature control. At this time, double click [+] or [-] to switch the pre stored setting mode. The upgrading of the host is in progress, and some functional operations begin to change gradually. The setting of key positions also begins to develop from the three key host to two new key structures:

1. Add functional keys to simplify the operation of entering the menu. Each key has a clearer division of labor and is easier to select the functional mode, such as fumytech ferobox 65W, augvape zoom 60W, etc

2. Reduce the keys and return to the single key structure, but add a large-size touch screen to realize the touch like convenient selection function and adjust the power. Although the application of combined keys is reduced, the power consumption of the touch screen is also a major defect, such as teslacigs touch 150W, sigelei T200, etc.

Among the two development trends of touch screen and function key, the author prefers the development trend of function key. The birth of function key not only ensures easy operation, but also is not afraid of the power consumption brought by touch screen, so as to ensure the endurance.